Introduction to high temperature printing silicone ink

Jul 22, 2021

The product adopts high-temperature vulcanization technology, which is a two-component ink suitable for surface decoration and protection of silica gel; Suitable for screen printing, pad printing or dot printing.

1. Characteristics

The printing pattern or font is clear and full, with strong adhesion.

Scope of application: electronic products such as mobile phone, telephone, notebook computer, fax machine, copier, electronic remote control, etc.

2. How to use it

① Sulfur the material twice (150 ℃ / 1-2 hours) and clean the surface.

② After the ink is taken out from the refrigerator, it needs to wait for the ink temperature to return to room temperature or close to room temperature before it can be used. Add 1-1.2% cat-spl-5 and stir evenly for screen printing, pad printing or dot printing. When using, if the viscosity is too high, the odorless kerosene can be properly added to adjust to the appropriate viscosity.

③ After standing in a dust-free environment for 5-10 minutes, vulcanization was carried out.

④ Bake at 200-220 ℃ for 10-15 minutes and vulcanize for 30 minutes if necessary.

Send Inquiry